Benefits

• · Highly diluted to be economical but have no problems with rust or corrosion! Machined surfaces are perfectly finished.
• · Excellent cooling effect reduces friction providing longer intervals between dressing and is economical.
• · Superior corrosion inhibition means no anti-rust treatment is required in the short-term.
• · The solution has excellent cleaning properties preventing the whetstone from clogging and leaving a perfect grinding surface.
• · The grinding fluid is diluted with tap water making it very economical.
• · The solution is long lasting, it does not deteriorate.
• · The solution is transparent and does not foam making it easy to work with.
• · The solution does not contain substances hazardous to people or the environment.

Performance

 SUPER COOL M-3A is a solution type fluid. Excellent corrosion inhibition is provided by the inclusion of two double-linked substances (oil and package) having specialized anti-corrosion properties.
 SUPER COOL M-3A has strong lubrication and anti-welding deposit properties a low surface tension and strong wettability providing excellent penetration. Since clogging does not occur, cutting performance is as expected and the working ratio increases as friction with unwanted chips is prevented and the interval between dressings is longer. The diluted solution is colorless and transparent allowing continuous observation of the working surface during operations.
 There is very little degradation of performance under normal use eliminating regular replacement of the product. The solution also contains a component that prevents the proliferation of bacteria that causes foul odors in summer. There is no deterioration in quality. That SUPER COOL M-3A is a water soluble grinding fluid that matches the oil-based grinding fluids is quite clear. In addition, it successfully fulfills user needs for safety, foaming and anti-foam, separation of chips, and lack of deterioration. SUPER COOL M-3A does not contain substances hazardous to humans so can be used safely.

Examples

●Examples of dilution ratios and purposes●

1:10 to 1:30	Cast iron grinding, Heat resistant steel grinding, Titanium grinding
1:20 to 1:50	Thread grinding, Tap groove grinding, Race surface grinding of ball bearings, Crank shaft finishing
1:20 to 1:50	Steel, tool steel, Cylindrical grinding of bearing steel, Surface grinding, Centerless grinding
1:30 to 1:80	Stone grinding, Plastic grinding, Ceramic grinding

●Example●

Cylindrical grinding

Material SCM-3

Whetstone MA80 K7VHW

SUPER COOL M-3A 1:50 diluted solution

	1:50 diluted solution	SUPER COOL M-3A 1:50 diluted solution
Dressing interval	40	80
Dimension accuracy	to 7μ	to 5μ
Surface finishing	0.8 to 1.2ｓ	0.7 to 0.8ｓ

(Note) The dilution ratios are for tests by our firm. The ratio will change according to conditions of use.

[Whetstone selection]

 It is also frequently used for sulfur treated whetstones, internal cooling grinding and thread grinding.
 The dilution ratio of the solution also has an effect on grinding operations. The standard dilution ratio for SUPER COOL M-3A is 1:20 to 1:50. Changing the ratio to suit the operation yields desirable results.

[Dilution]

 Our water soluble products are intended to be diluted with tap water according to the purpose of use. When mixing the solution add the prescribed amount of cutting fluid to a container of water and stir before pouring into a tank.

[Replenishment]

 When the cutting fluid has depleted, do not replenish with only water but a properly diluted solution. (If only water is added corrosion may occur.)